Product name
TESSODRIL BS 1519                   Corrosion Inhibitor


TESSODRIL BS 1519 is an inorganic non foaming water soluble corrosion inhibitor which is very effective for protection of flow lines, pumps and equipment from oxygen pitting and sweet corrosions at elevated temperature. TESSODRIL BS 1519 also give a good shale inhibition properties and is particularly suitable for drilling using aerated fluid or foam.


Depending on corrosion severity and actual treatment conditions, the required dosage of TESSODRIL BS 1519 has to be determined experimentally, however in general a dosage of 0.5 – 2 ppb usually sufficient to give a good corrosion protection.

For Shale Inhibition purpose a dosage of 3-5 ppb will be sufficient to give a good inhibition.


Appearance                           : Clear liquid

Color                                      :  Light to dark brown

pH 5% solution                      : 8.5 – 10.5

Viscosity                                 : < 100  cP

Density                                   : 1.05 – 1.15  g/cm3

Solubility                                : Easily soluble in water

Packing and Handling

TESSODRIL BS 1519 is packed in 55 US gallon plastic drum.

TESSODRIL BS 1519 may cause eye and skin irritation. Avoid contact with eye and skin by wearing goggles and gloves. For skin contact wash with water and soap while eye contact flush eyes well with water for 15 minutes.

This product is available from  PT. TESSO TETRA CHEMIKA  Cikarang, Indonesia

Head Office Address

Jl. Industri Selatan 2 Blok. JJ Kav.4
Jababeka Industrial Estate
Cikarang – Bekasi 17550, Indonesia.

Tel. +62-21-8983-0665, Fax. +62-21-8983-0686

Map Head Office

error: Content is protected !!